Search results

In recent years, three-dimensional (3D) seismic base isolation system has been studied extensively. This paper aims to propose a new 3D combined isolation bearing (3D-CIB) to mitigate the seismic response in both the horizontal and vertical directions.

The new 3D-CIB composed of laminated rubber bearing coupled with combined disk spring bearing (CDSB) was proposed. Comprehensive analysis of constitution and theoretical derivation for 3D-CIB were presented. The advantage of CDSB is that the constitution can be flexibly adjusted according to the requirements of the bearing capacity and vertical stiffness. Hence, four different combinations of CDSB were designed for the 3D-CIB and employed to isolate nuclear reactor building. A comparative study of the seismic response in terms of seismic action, acceleration floor response spectra (FRS), peak acceleration and relative displacement response was carried out.

3D-CIB can effectively reduce seismic action, FRS and peak acceleration response of the superstructure in both the horizontal and vertical directions. Overall, the horizontal isolation effectiveness of 3D-CIB was slightly influenced by vertical stiffness. The decrease in the vertical stiffness of the 3D-CIB can reduce the vertical FRS and shift the peak values to a lower frequency. The vertical peak acceleration decreased with a decrease in the vertical stiffness. The superstructure exhibited a rocking effect during the earthquake, and the decrease in the vertical stiffness may increase the rocking of the superstructure.

Although the advantage of 3D-CIB is that the vertical stiffness can be flexibly adjusted by different constitutions, the vertical stiffness should be designed by properly accounting for the balance between the isolation effectiveness and displacement response. This study of isolation effectiveness can provide the technical basis for the application of 3D-CIB into real engineering of nuclear power plants.

Based on an uncertainty model with an infinite horizon, this chapter analyzes how financial development and monetary policy in two countries can impact international trade and capital flows and influence individual behavior and welfare. Our study shows that differences in capital market development are the major contributing factors for trade imbalance and investment among countries. We also find that monetary policies are important factors affecting the trade balance, consumption, and investment. Countries with one-sided, pegging exchange rate policies tend to buy more bonds and enjoy larger trade surpluses. This effect is closely related to the level of capital market development: in these two countries, at higher stages of development, the effects of idiosyncratic monetary policy on imbalance are amplified.

Members’ sustained participation positively influences success of brand community. Although scholars have confirmed the effects of social capital on continuance intention in third-party hosted communities, little work has been done to explore these relationships in context of enterprise-sponsored brand communities, especially, the precursors of active members’ sustained participation in such context is still unclear. Besides, how to recognize active users with high precision and coverage remains an open question. Therefore, this paper aims to propose a novel method to identify active users effectively and investigate the antecedents of their continuance intention from perspective of social capital in enterprise-sponsored brand community.

This work established several social networks based on the information of Xiaomi smartphone forum users’ posts and feedbacks. Node centrality (out-degree) analysis was adopted to identify the users with high degree of active in these networks, and then behaviour analysis was performed to exclude the community managers from the group of active users. Finally, a research model was proposed based on the theory of social capital. It was tested by applying partial least squares technique, and the data were collected from a survey of members (n = 327) of Xiaomi forum.

The empirical results showed that the proposed method can recognize the active users effectively. Additionally, social tie, identification, trust and shared vision were proved to be significant predictors of active users’ continuance intention in the context of enterprise-sponsored brand community.

This paper contributes to the information system usage literature and provides opinions regarding how social capital influence active users’ sustained participation in enterprise-sponsored brand community. Besides, this work proposed a novel method to identify active users, which will be useful to assist enterprises to improve their community management.

Promoting technological innovation is important to address the complexity of major engineering challenges. Technological innovations include short-term innovations at the project level and long-term innovations that can enhance competitive advantages. The purpose of this study is to develop an incentive mechanism for the public sector that considers short-term and long-term efforts from the private sector, aiming to promote technological innovation in major engineering projects.

This study constructs an incentive model considering the differences in short-term and long-term innovation efforts from the private sector. This model emphasizes the spillover effect of long-term efforts on current projects and the cost synergy effect between short-term and long-term efforts. It also explores the factors influencing the optimal incentive strategies for the public sector and innovation strategies for the private sector.

The results indicate that increasing the output coefficient of short-term and long-term efforts and reducing the cost coefficient not only enhance the innovation efforts of the private sector but also prompt the public sector to increase the incentive coefficient. The spillover effect of long-term innovation efforts and the synergy effect of the two efforts are positively related to the incentive coefficient for the public sector.

This research addresses the existing gap in understanding how the public sector should devise incentive mechanisms for technological innovation when contractors acting as the private sector are responsible for construction within a public-private partnership (PPP) model. In constructing the incentive mechanism model, this study incorporates the private sector's short-term efforts at the project level and their long-term efforts for sustained corporate development, thus adding considerable practical significance.

Promoting low-carbon in the construction industry is important for achieving the overall low-carbon goals. Public–private partnership is very popular in public infrastructure projects. However, different perceptions of low-carbon and behaviors of public and private sectors can hinder the realization of low-carbon in these projects. In order to analyze the willingness of each stakeholder to cooperate towards low-carbon goals, an evolutionary game model is constructed.

An evolutionary game model that considers the opportunistic behavior of the participants is developed. The evolutionary stable strategies (ESSs) under different scenarios are examined, and the factors that influence the willingness to cooperate between the government and private investors are investigated.

The results illustrate that a well-designed system of profit distribution and subsidies can enhance collaboration. Excessive subsidies have negative impact on cooperation between the two sides, because these two sides can weaken income distribution and lead to the free-riding behavior of the government. Under the situation of two ESSs, there is also an optimal revenue distribution coefficient that maximizes the probability of cooperation. With the introduction of supervision and punishment mechanism, the opportunistic behavior of private investors is effectively constrained.

An evolutionary game model is developed to explore the cooperation between the public sector and the private sector in the field of low-carbon construction. Based on the analysis of the model, this paper summarizes the conditions and strategies that can enable the two sectors to cooperate.

This study aims to improve the muscle model control performance of a tendon-driven musculoskeletal system (TDMS) to overcome disadvantages such as multisegmentation and strong coupling. An adaptive network controller (ANC) with a disturbance observer is established to reduce the modeling error of the musculoskeletal model and improve its antidisturbance ability.

In contrast to other control technologies adopted for musculoskeletal humanoids, which use geometric relationships and antagonist inhibition control, this study develops a method comprising of three parts. (1) First, a simplified musculoskeletal model is constructed based on the Taylor expansion, mean value theorem and Lagrange–d’Alembert principle to complete the decoupling of the muscle model. (2) Next, for this simplified musculoskeletal model, an adaptive neuromuscular controller is designed to acquire the muscle-activation signal and realize stable tracking of the endpoint of the muscle-driven robot relative to the desired trajectory in the TDMS. For the ANC, an adaptive neural network controller with a disturbance observer is used to approximate dynamical uncertainties. (3) Using the Lyapunov method, uniform boundedness of the signals in the closed-loop system is proved. In addition, a tracking experiment is performed to validate the effectiveness of the adaptive neuromuscular controller.

The experimental results reveal that compared with other control technologies, the proposed design techniques can effectively improve control accuracy. Moreover, the proposed controller does not require extensive considerations of the geometric and antagonistic inhibition relationships, and it demonstrates anti-interference ability.

Musculoskeletal robots with humanoid structures have attracted considerable attention from numerous researchers owing to their potential to avoid danger for humans and the environment. The controller based on bio-muscle models has shown great performance in coordinating the redundant internal forces of TDMS. Therefore, adaptive controllers with disturbance observers are designed to improve the immunity of the system and thus directly regulate the internal forces between the bio-muscle models.

The literature on corporate governance has experienced an explosive growth in the past decade and presented some new trends. One purpose of this paper is to make an exploratory survey of this. Since China is a typically emerging and transition economy, another purpose of this paper is to review some domestic studies with an intention to discover the evolution logic of corporate governance practices in China under a complicated and exclusive context, the third purpose is to provide future research directions.

This paper surveys recent literature in the field of corporate governance, intending to find out the development trends and extract the main line of literature on and practices of Chinese corporate governance.

In this paper, we find that recent literature on corporate governance provides some new insights into subtle characteristics of governance, governance effects of relational network, political connections, corporate governance evaluation and financial institutions governance. During the past decade, the literature on Chinese corporate governance has referred to some new areas during the transition process from administrative governance to economic governance. In addition to the above, we attempt to put forward an analytical framework and the proposition that Chinese corporate governance is in the transition process from administrative governance to economic governance.

The authors propose some research topics where future studies on corporate governance may prove valuable, especially putting forward an analytical framework which can be used for discussing and analyzing corporate governance in China.

This paper reviews some new trends of literature on corporate governance and makes a contribution to corporate governance studies by providing fruitful directions, extracting the main line and analytical framework for China's mode during the transition process from administrative governance to economic governance.

This study develops a model and algorithm to solve the decentralized resource-constrained multi-project scheduling problem (DRCMPSP) and provides a suitable priority rule (PR) for coordinating global resource conflicts among multiple projects.

This study addresses the DRCMPSP, which respects the information privacy requirements of project agents; that is, there is no single manager centrally in charge of generating multi-project scheduling. Accordingly, a three-stage model was proposed for the decentralized management of multiple projects. To solve this model, a three-stage solution approach with a repeated negotiation mechanism was proposed.

The experimental results obtained using the Multi-Project Scheduling Problem LIBrary confirm that our approach outperforms existing methods, regardless of the average utilization factor (AUF). Comparative analysis revealed that delaying activities in the lower project makespan produces a lower average project delay. Furthermore, the new PR LMS performed better in problem subsets with AUF < 1 and large-scale subsets with AUF > 1.

A solution approach with a repeated-negotiation mechanism suitable for the DRCMPSP and a new PR for coordinating global resource allocation are proposed.

Studies on titanium implants have shown that the mechanical properties of the parts are affected by the microstructure characteristic derived from the manufacturing process. The properties of different orientations of specimens under the same process parameters will be different, which should be considered in the application of bone implants. This paper aims to understand the influence of microstructure on micro-hardness, wear and corrosion resistance in different orientations.

The authors manufactured titanium parts and carried out micro-hardness, wear tests and electrochemical corrosion of different orientations under the same process conditions. Then, finally studied the evolution mechanism of the microstructure in different orientations and its influence mechanism on wear and corrosion mechanism.

The melting method makes the grains on the surface in XY orientation finer. The wear mechanism of XY orientation is abrasive wear, that of XZ and YZ orientations are adhesive wear. During corrosion, XY orientation forms a stable passivation film earlier. Compared with XZ and YZ orientations, XY orientation has higher micro-hardness, better wear and corrosion resistance.

In this paper, the microstructure, wear and corrosion resistance of selective laser melted parts were discussed and the differences in different orientations under the same experimental conditions were discussed. The evolution mechanism of the microstructure in different orientations and its influence mechanism on wear mechanism and corrosion mechanism was studied. The mechanical anisotropy of selective laser melted components was discussed.

The purpose of this paper is to use systemic thinking to explain and predict the cost of logistics outsourcing, and to devise policies to minimize the cost of risk.

A method of system dynamics is adopted to capture the dynamic interaction of logistics outsourcing systems and to analyze the impact of some factors in the system on policy decisions over a long‐term horizon.

This paper illustrates the internal mechanism of the logistics outsourcing cost of risk systems by virtue of system dynamic principles, to develop a system dynamics model, and to give a quite detailed description of how the model could work.

The results of the simulation analysis provide useful information for logistics outsourcing risk managers.

This paper contributes to the discussion on the use of system dynamics for studying logistics outsourcing cost of risk.